egt meter, volt booster, headers, and much more

[1985GN]

Mannix EGT gauge that records highest egt, its a clamp in style alls you have to do is drill a small hole in header and install....$75 bucks shipped

3" solid MAF pipe with a blue 4"-3" reducer and a 3"-3" reducer, has many nicks in it and would need to be stripped and repainted...$40 shipped

2 stock valve covers, p/s has breather and driver side comes with fill tube and k&n style breather..also has a small baggle welded into oil fill hole to prevent oil going into breathers to much.....$50 shipped

volt booster......$40 shipped

A/C delete setup.....$40 shipped

rear springs cargo coil style about 2 months old....$55shipped

jdmmotorz ebay headers.....this kit is complete minus the fact that the crossover needs to be made to fit, i already had someone start on it by cutting and fitting but never made it to welding....the crossover has some dings in it and needs finishing or you could just get one custom made at local muffler place...letting these go for.... $140 shipped

stock lower control arms...make offer

stock complete pulley set for motor...make offer


this stuff needs to go no reasonable price denied......thanks

 

[pm87tb]

springs

Hi do you have a name and part # for the springs? thanks

 

[1985GN]

no dont know the part numbers off the top of my head i ordered them from the local parts store for my car.....

 

[buickturbot]

e-mailed you on the headers

 

[BadAssGN]

second in line on the headers and pm sent on the EGT

 

[1985GN]

buickturbot already got the headers and a pm was sent on the egt, thanks guys

 

[1985GN]

TTT people this stuff has got to go...headers are already sold everything else is still here

 

[pontiac6269]

3" solid MAF pipe with a blue 4"-3" reducer and a 3"-3" reducer, has many nicks in it and would need to be stripped and repainted...$40 shipped

Interested in this, whats the pipe made of? Is a straight maf pipe or does it have bends in it? Could i get a picture? Thanks.

Eric

 

[1985GN]

its an old chrome one from postons that has the bends in it...dont have a pic at this time but like i said it has chips in it since it was painted a couple times just needs a good sanding and some new paint and its good to go....

 

[GNJoe86]

interested in the Egt Pic's please.

Thanks, Joe

 

[pontiac6269]

sent pm on the maf pipe. thanks

Eric