Engine harness routing

[87we410877]

Can someone send me a pic of the factory routing of the engine harness from the firewall to up by the heater box? I feel like I have way too much length here. See attached pics. Thanks!

 

[mikestertwo]

It looks long because you don't have the inner fender and plastic wheel well bolted in. Once they are bolted in you will see the harness goes up the back of the plastic well then across the front of the A/C unit.

 

[1986 Buick GX1]

^^^ X2
Mine is 100% factory. It comes out of the oval loom, across the front of the A/C box, up over the A/C box past the fan motor and to the corner where the cowl and fender meet then down somewhere.

If you zoom in you can see it follow the A/C line behind the receiver/ dryer.

 

[87we410877]

Thank you! How about out of the firewall?

There are also two metal harness brackets that slide onto two small pins coming off of the bottom of the AC box and are held on with star washers I believe. Does anyone have a picture of that ? I have one bracket but need one more