External Wastegates
- Thread starter smallv6
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
I looked into the HKS waste gates as replacements, but they will not bolt directly up. I will check into the Innovative gates and see if they are direct ATR replacements. If you are interested, Email me and I will get a price on the Innovative stuff for ya. ERIC.
I think this is one of the best one out there http://www.srmotorsports.com/Tial_Wastegates.html
But I also heard good stuffs on the Deltagate or the Racegate.
But I also heard good stuffs on the Deltagate or the Racegate.
J
JCotton
Guest
I have been using and selling the Turbonetics, racegate and delta gate. They work great and offer the best bang for the buck. The deltagate is rated to 400hp, the racegate is rated to 1000hp. You willneed an upgrade on the DP if you need a racegate.
hope that helps,
hope that helps,
REDS HOT AIR
Buick Tweaker
- Joined
- May 24, 2001
- Messages
- 3,433
I use a deltagate on my atr pipe
never had any boost problems
never had any boost problems
HKS GT II
http://shop.store.yahoo.com/wotmstore/hksgtiwas.html
Good info on the most up-to-date WG from HKS...50 & 60mm.
You'd need a new, larger flange if you'd previously had the ATR WG on your 3" DP.
HTH
(Need to shop that price around)
http://shop.store.yahoo.com/wotmstore/hksgtiwas.html
Good info on the most up-to-date WG from HKS...50 & 60mm.
You'd need a new, larger flange if you'd previously had the ATR WG on your 3" DP.
HTH
(Need to shop that price around)
J
JCotton
Guest
Racegate price is $395.00
trading t/a
I'm Angry!!!!!
- Joined
- Aug 6, 2001
- Messages
- 1,120
Does anyone dump the exhaust to the atmosphere? I'm debating on whether I need to run it back to the dp or not? How loud is it ? Is it louder than driving around with the cutout open.
trading t/a
I'm Angry!!!!!
- Joined
- Aug 6, 2001
- Messages
- 1,120
If you are ony venting one side of the engine(1,3,5) wouldn't that cause a problem and still let 2,4, and 6 still spin the turbine? What are the shortcomings of a setup like that. I have the the provision on the turbine housing to mount the gate but wondered if the exhaust gases venting into the engine bay would burn stuff up.
Re: PIC OF GT II
That wastegate will not fit without making huge changes. Here is a comaprison of the HKS GT Wastegate. The GT is the same size as the GT-II. They are made for 400-1000+ HP. I would use their smaller gates like the HKS Standard or the HKS Racing. I can get any of those gates for a good price. ERIC.
That wastegate will not fit without making huge changes. Here is a comaprison of the HKS GT Wastegate. The GT is the same size as the GT-II. They are made for 400-1000+ HP. I would use their smaller gates like the HKS Standard or the HKS Racing. I can get any of those gates for a good price. ERIC.
Re: HKS GT II
I can get anyone that the GT-II for a lot less than what is on WOTM.com can. Email me Eric@bnecustoms.com for price. Thanks.
Originally posted by Two Lane
http://shop.store.yahoo.com/wotmstore/hksgtiwas.html
Good info on the most up-to-date WG from HKS...50 & 60mm.
You'd need a new, larger flange if you'd previously had the ATR WG on your 3" DP.
HTH
(Need to shop that price around)
I can get anyone that the GT-II for a lot less than what is on WOTM.com can. Email me Eric@bnecustoms.com for price. Thanks.
GT-II
The HKS GT II wastegate is the second generation of the high-performance HKS wastegates.
Available in 50mm and 60mm, its new more compact design continues to offer the V-Band inlet and outlet flanges for high capacity exhaust flow for exceptional boost management.
New GT II wastegate features-----------------------------------
* Reduced Weight and Size:
2/3 the weight (1509 grams compared to 2246 grams) and much smaller in height and width than the original GT Wastegate.
* Performance and Function: Identical exhaust flow volume rating, 60mm stainless steel valve and V-band inlet flange as the original GT Wastegate.
* Durability and Construction: Stainless Steel lower housing and Purple anodized aluminum upper housing.* Flexibility and Versatility: Now available as one part number, The GT II 60mm is adjustable from 0.6 to 2.1 kg/cm2 and the GT II 50mm is adjustable from 0.8 to 2.0 kg/cm2.
Each kit comes with with (2) additional springs (2 built-in), to offer (4) different spring settings. Also included are the special tool and upper case design for easy spring changes.
=====================================
HTH
The HKS GT II wastegate is the second generation of the high-performance HKS wastegates.
Available in 50mm and 60mm, its new more compact design continues to offer the V-Band inlet and outlet flanges for high capacity exhaust flow for exceptional boost management.
New GT II wastegate features-----------------------------------
* Reduced Weight and Size:
2/3 the weight (1509 grams compared to 2246 grams) and much smaller in height and width than the original GT Wastegate.
* Performance and Function: Identical exhaust flow volume rating, 60mm stainless steel valve and V-band inlet flange as the original GT Wastegate.
* Durability and Construction: Stainless Steel lower housing and Purple anodized aluminum upper housing.* Flexibility and Versatility: Now available as one part number, The GT II 60mm is adjustable from 0.6 to 2.1 kg/cm2 and the GT II 50mm is adjustable from 0.8 to 2.0 kg/cm2.
Each kit comes with with (2) additional springs (2 built-in), to offer (4) different spring settings. Also included are the special tool and upper case design for easy spring changes.
=====================================
HTH
