Fast XFI 2.05 Calibration File

[greeneyegi]

Finally getting time to do tuning. Getting C5/C6 Fused on Sep 30th so working from home opened up time for me.
Anyways Car runs good. So Im slowly going through points to tune 1x1. I notice big differences in some scopes of the tune and wondering if anybody has a Calibration file for similar setup?
Here's my setup, don't need exact but something similar to study differences.
6262/rollercam/rr/ported stock heads/120lbinj/NL17BladePTC/91octane/I have Alky but going to remove and just run IDK 15 psi for now.
LMK if I'm missing anything. I've attached a cal. file if interested and a couple short log...

 

[norbs]

IT needs some work, looks like you were using the learning. shut it off and fix your ve table in boost. and remove the 33 degrees timing at 3000 rpm at 8 psi boost your asking for knock.

 

[greeneyegi]

IT needs some work, looks like you were using the learning. shut it off and fix your ve table in boost. and remove the 33 degrees timing at 3000 rpm at 8 psi boost your asking for knock.

Do you have a table you could share? All 3? Want to compare.