You can type here any text you want

Fast XFI, GTQ70, Champion Fuel Rails, 96lb Injectors,Champion Spacer

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

87TurboGN

Member
Joined
Sep 9, 2007
Messages
92
See pictures below. I am beginning to slowly part out my car. Parts have all bee used less then 500 miles. Call me if ou have questions 859-312-3184 or message me. Paypal accepted, but you pay the fees.

Fast Fuel XFI includes:
Fast XFI ECU w/o2
Buick Adapter Harness 36"
Internal Data logger
XFI Thumbwheel
3 Bar Map Sensor
Wideband
O2 Bung
Fuel/Oil Loggin harness with sensors and fittings
Conservative tune loaded.

$2000 Delivered - This is a $400 savings off a new set up wtih these items

Limit Engineering GTQ 70MM Turbo
3 bolt
4inch inlet
2.5 inch out
Journal bearing
1 HD Actuator
1 LD Actuator
4 -AN Feed Oil Line Included
Feed and Drain Fittings included
Perfect condition
$1000 Delivered - $400 less than a new one

Delphi 96 Lb Injectors - 6
Excellent condition

$300 Delivered - $100 less than new

Champion Fuel Rails - NON STOCK FUEL REGULATOR version
Excellent condition
Bolts included
$200 Delivered - $50 less than new

Champion 1" Plenum Spacer
Gaskets and Bolts
$75 Delivered

This is only the beginning of my parts, more to come after these.
 

Attachments

  • DSC_2154 (Large).JPG
    DSC_2154 (Large).JPG
    140 KB · Views: 205
  • DSC_2155 (Large).JPG
    DSC_2155 (Large).JPG
    114.5 KB · Views: 182
  • DSC_2161 (Large).JPG
    DSC_2161 (Large).JPG
    59.4 KB · Views: 175
  • DSC_2163 (Large).JPG
    DSC_2163 (Large).JPG
    84.5 KB · Views: 193
  • DSC_2164 (Large).JPG
    DSC_2164 (Large).JPG
    53.2 KB · Views: 178
fuel rails? will those fit the stock intake? I know you have to use an external regulator with these.
 
fuel rails? will those fit the stock intake? I know you have to use an external regulator with these.
Yes the champion rails will fit.

You need some washers to raise the rear of the rail up so that it sits flush, but they fit and look so damn sweet.
 
im not fimilliar with that, will it work on my 87? i just know mine goes from the bottom of the turbo to the block of the motor in the front. mine is leaking bad and i wanna get one and stop puring in new oil all the time.
 
This is not what you need. You will have to get that from one of the vendors on the forum.
 
Spacer, Injectors - Sold

Sale Pending on Fule Rails and XFI, please continue to email if interested though, just incase it changes.
 
Fuel Rails Sold. - Have Turbo and lots of other stuff not listed yet. CAll me at 859-312-3184 on my other parts if you need something.
 
Back
Top