Fp

[HOTSIX]

What do you suggets my FP shuld be set at?

I had it a 43 PSI I think when I had the Thrasher chip in it. But its been turned down since then.

I currently have the Ultrachip by Caspers...TA33 and Blue Tops.
Plus all the other stuff listed below in my sig.

Just got a code 44 the other day - Lean Condn - and I think my FP may be low - not sure what to set it at......

Anyone ?

 

[cool 84]

43 is a good starting point. Make sure your 02 is working right and you don't have any exhaust leaks.

 

[HOTSIX]

Cool84 - thanks.
So 43 PSI - vac line off at idle - then increase from there right?

Wish I had a guage I could attach to the windshield to monitor it under WOT etc

 

[Squid4life]

https://www.casperselectronics.com/..._Code=102070&Category_Code=8485GN_Performance

$40 is not too bad for one to keep in the tool box or trunk to check FP at WOT every once in a while, or while at the track.

Take care!

Squid