I am selling the roller I have just bought a few months ago. I bought 'Allgljoe"s roller car that is complete less engine. For many, you know this car as on RJC's website as GN vs. Hayabusa Here is the list of what the car has:
RJC Mega-cooler
B&M Trans cooler
AlkyControl is on the car
Rossler TH400 w/Brake, blow-shield, deep pan & arround 3800 stahl(Roughly 500 miles on the trans since built) & some passes at the track
TCI Outlaw shifter
Dual Fans from Hartline
AMS 500 boost controller
Aftermarket driveshaft with big joints built for TH400
Rear of car has all HR Parts bars in rear
HR Parts rear sway bar
Bagged on both sides in rear
Moser 12-bolt with big axles, spool, 3:73 gears & aluminum support cover
Car has all gauges in it as seen in pics
Roll-bar cert. car to 10.00
Weld wheels all the way around with 2-spare rear rims(15x8) to go with it
F.A.S.T. XFI unit with plugs for distributor pickup or coilpack
Reds Double pumper
Car has a nice stereo system in it as seen in pics.
Body on car in decent shape. Bottom of doors will need some attention, but the rest of the car is very solid. Has nice paint on it, but they didn't pull the quarter windows out of it when they painted it. Car does have power antenna and trunk release, windows, seat and locks. Interior in car is in decent shape(needs a good cleaning). Car does have a few dings in it as well. Body does have 97,000 on it.
Rear frame was PROFESSIONALLY NOTCHED, to fit the big tire.
Tires are 325/50/15's on the rear as seen in the pic.
I do have pieces for the A/C, but the heater box was broke(cracked) in the
car when I bought it.
Looking to get $9500 out of the roller. Everything listed above goes in this package deal.
RJC Mega-cooler
B&M Trans cooler
AlkyControl is on the car
Rossler TH400 w/Brake, blow-shield, deep pan & arround 3800 stahl(Roughly 500 miles on the trans since built) & some passes at the track
TCI Outlaw shifter
Dual Fans from Hartline
AMS 500 boost controller
Aftermarket driveshaft with big joints built for TH400
Rear of car has all HR Parts bars in rear
HR Parts rear sway bar
Bagged on both sides in rear
Moser 12-bolt with big axles, spool, 3:73 gears & aluminum support cover
Car has all gauges in it as seen in pics
Roll-bar cert. car to 10.00
Weld wheels all the way around with 2-spare rear rims(15x8) to go with it
F.A.S.T. XFI unit with plugs for distributor pickup or coilpack
Reds Double pumper
Car has a nice stereo system in it as seen in pics.
Body on car in decent shape. Bottom of doors will need some attention, but the rest of the car is very solid. Has nice paint on it, but they didn't pull the quarter windows out of it when they painted it. Car does have power antenna and trunk release, windows, seat and locks. Interior in car is in decent shape(needs a good cleaning). Car does have a few dings in it as well. Body does have 97,000 on it.
Rear frame was PROFESSIONALLY NOTCHED, to fit the big tire.
Tires are 325/50/15's on the rear as seen in the pic.
I do have pieces for the A/C, but the heater box was broke(cracked) in the
car when I bought it.
Looking to get $9500 out of the roller. Everything listed above goes in this package deal.