You can type here any text you want

FS 87 GN Roller w/mods

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

bnova

stageI
Joined
Jan 2, 2009
Messages
19
I am selling the roller I have just bought a few months ago. I bought 'Allgljoe"s roller car that is complete less engine. For many, you know this car as on RJC's website as GN vs. Hayabusa Here is the list of what the car has:

RJC Mega-cooler
B&M Trans cooler
AlkyControl is on the car
Rossler TH400 w/Brake, blow-shield, deep pan & arround 3800 stahl(Roughly 500 miles on the trans since built) & some passes at the track
TCI Outlaw shifter
Dual Fans from Hartline
AMS 500 boost controller
Aftermarket driveshaft with big joints built for TH400
Rear of car has all HR Parts bars in rear
HR Parts rear sway bar
Bagged on both sides in rear
Moser 12-bolt with big axles, spool, 3:73 gears & aluminum support cover
Car has all gauges in it as seen in pics
Roll-bar cert. car to 10.00
Weld wheels all the way around with 2-spare rear rims(15x8) to go with it
F.A.S.T. XFI unit with plugs for distributor pickup or coilpack
Reds Double pumper
Car has a nice stereo system in it as seen in pics.
Body on car in decent shape. Bottom of doors will need some attention, but the rest of the car is very solid. Has nice paint on it, but they didn't pull the quarter windows out of it when they painted it. Car does have power antenna and trunk release, windows, seat and locks. Interior in car is in decent shape(needs a good cleaning). Car does have a few dings in it as well. Body does have 97,000 on it.
Rear frame was PROFESSIONALLY NOTCHED, to fit the big tire.
Tires are 325/50/15's on the rear as seen in the pic.
I do have pieces for the A/C, but the heater box was broke(cracked) in the
car when I bought it.

Looking to get $9500 out of the roller. Everything listed above goes in this package deal.
 

Attachments

  • 100_1707.jpg
    100_1707.jpg
    104.6 KB · Views: 1,229
  • 100_1708.jpg
    100_1708.jpg
    84.4 KB · Views: 1,232
  • 100_1709.jpg
    100_1709.jpg
    96.3 KB · Views: 1,222
  • 100_1710.jpg
    100_1710.jpg
    93.7 KB · Views: 1,229
  • 100_1711.jpg
    100_1711.jpg
    105.3 KB · Views: 1,229
more pics

Here are some more pics!
 

Attachments

  • 100_1712.jpg
    100_1712.jpg
    60.2 KB · Views: 1,219
  • 100_1713.jpg
    100_1713.jpg
    80 KB · Views: 1,213
  • 100_1714.jpg
    100_1714.jpg
    80.9 KB · Views: 1,207
  • 100_1715.jpg
    100_1715.jpg
    53.8 KB · Views: 1,207
  • 100_1716.jpg
    100_1716.jpg
    101.7 KB · Views: 1,210
last set of pics

pics
 

Attachments

  • 100_1719.jpg
    100_1719.jpg
    79.3 KB · Views: 1,188
  • 100_1720.jpg
    100_1720.jpg
    83.2 KB · Views: 1,193
  • 100_1721.jpg
    100_1721.jpg
    70.1 KB · Views: 1,185
  • 100_1723.jpg
    100_1723.jpg
    77.2 KB · Views: 1,192
  • 100_1727.jpg
    100_1727.jpg
    72.4 KB · Views: 1,191
Keep eyes open. If car doesn't sell in next month, I will probably be parting it out.
 
I'm not interested myself, but have you considered not fully parting it out, but just getting rid of major items and selling the rolling chasis without all the pieces?

Seems like a nice enough roller not to be taken apart, but guys might be shy to spend that much $ on a car with no engine.

Definitely, there's a market for the intercooler, trans, xfi, alky system, suspension.. My guess is that stuff will go quick - is easy to sell/ship and is 1/2 the value. For sure someone would bey the rest of the car for 4500 or so.
 
Have thought of several ways of parting it, not sure what's best. Just want to get out of it what I can, and move onto next. I may keep some items off of it myself. The car had a TA aluminum 274" in it.
 
roller

i have an on-center motor now collecting dust what's involve in cost to have it installed and fabricate the pipings (headers and downpipes and adapting a 4 barrel carb intake), etc.. i do have a seq FAST and MSBC, i don't have a turbo, fmic, and injectors yet. This will be my #3 stage 2 car if it happens. Your roller i think is a perfect donor at this point.
 
Back
Top