Fs: hr lca's, new a1000, 83# injectors, alky kit

[KevinB]

Got a car here that I'm changing the setup on. These parts (except lca's) are new and have been installed with just run time.

Aeromotive a1000 pump.
$250 ($334 at jegs)

Razor dual nozzle alky kit. The pump and tank were mounted the wiring was never installed.
$500

83# injectors. Idle time only.
$250 for the six of them

Hr parts lca's. Used for about a year on my silver car. These are not drilled for a stock type roll bar.
$175

I need a hr parts anti roll bar for a 9". Will do some trading.

 

[KevinB]

Pm's replied.
I will get pics of the parts after work this evening for those asking.

 

[KevinB]

Here's the pics. The alky system is the older style. I will take $400 for it. Obo on the rest. Filters do not come with a1000

 

[Bobby Smith]

Could u email me so I could ask u some questions about ally system
1973camaroz@Comcast.net

 

[KevinB]

A1000 sold locally.
$300 for alky shipped (no map sensor)
Make offers on the rest

 

[Scott Atk]

I have the HR swaybar for a 9". The link bars are slightly tweaked from my wreck. They could possibly be straightened or worst case replaced. Sucks I'm too late on the A1000 trade. Did you sell the pre and post filter as well?

 

[KevinB]

Scott, I may be using the filters. I will know later tonight. I need to see if they are compatible with e85. If they are not, I will sell them. The pump was sold locally. The guy that bought it is coming tonight to pick it up. I will be taking car apart tonight. I will post up if the filters will be up for grabs.

 

[Bobby Smith]

Can the alky system be used on a mildly modified Buick I'm not sure how they work that's y I'm asking and I'm still new to these cars

 

[Scott Atk]

I'm looking for E85 as well so .... FYI, if it's cellulose it wont work, needs to be SS mesh.

Do you already have an HR Bar? If so, I would be willing to even trade the stock axle tube brackets for the 9" Ford brackets.

 

[KevinB]

Bobby, check out the alky section of this site. There is a lot more info there than I can supply. The answer is yes though. Many have great success with alky and a mild setup. I think that's where they work the best.

Scott, I haven't gotten a bar yet for the car. Waiting on some of these items to sell so the owner gets some capital to buy more parts. Are yoy saying get a bar with the stock brackets and trade you for the 9" ones? I can do that. It might be a week or so before I put an order in. I got a bunch if specific Buick parts off this car that are not listed but are supposed to be picked up tomorrow. That's where this guys hr bar money is coming from.

 

[Bobby Smith]

Ill take it can you give me 2 days to get funds in my pay pal account

 

[Scott Atk]

If you don't have the bar yet, I'll make you a great deal on the whole setup. As long as your cool with possibly having to purchase a couple things (under $100) to make it perfect.
$280 + shipping and Paypal fees.

 

[KevinB]

Ill take it can you give me 2 days to get funds in my pay pal account

Sounds good. I will put it pending to you until tuesday

 

[KevinB]

If you don't have the bar yet, I'll make you a great deal on the whole setup. As long as your cool with possibly having to purchase a couple things (under $100) to make it perfect.
$280 + shipping and Paypal fees.

I will run that past the owner.

 

[Bobby Smith]

Email me with PayPal info thanks

 

[KevinB]

Sent email bobby


Lower control arms and Injectors are still left. Make offers.

 

[FLAT BOOSTED]

put me in line second on the alky kit

 

[Speed_Dreamin']

Do the injectors require a modified ECM?

 

[Speed_Dreamin']

Do the injectors require a modified ECM?

Also - are they E85 compatible?

 

[KevinB]

They will work with e85. The injectors are low impedance and can damage a stock ecm if it has not been modded.