BEATAV8
The Engine Whisperer
- Joined
- Feb 14, 2002
- Messages
- 5,702
Anyone using this roller cam? Anyone have a cam card for it?
220/224 advertised, .527/.542 gross lift. 113 LSA
I presume the lobes are 3109 and 3119 judging by the listed specs.
Considering similar specs for a stroker motor project...
3.9 bore x 3.625 stroke, race ported GN1 aluminum heads, ~10:1 compression, E85
6766 .85 3 bolt turbo
99% street driven. Quiet, simple and reliable valvetrane is a high priority. Limited travel hydraulic lifters, 1.55 rockers, and PAC-1201X springs. Due to that I'm sorta avoiding XE lobes.
220/224 advertised, .527/.542 gross lift. 113 LSA
I presume the lobes are 3109 and 3119 judging by the listed specs.
Considering similar specs for a stroker motor project...
3.9 bore x 3.625 stroke, race ported GN1 aluminum heads, ~10:1 compression, E85
6766 .85 3 bolt turbo
99% street driven. Quiet, simple and reliable valvetrane is a high priority. Limited travel hydraulic lifters, 1.55 rockers, and PAC-1201X springs. Due to that I'm sorta avoiding XE lobes.
Last edited: