"More Boost"
Major Member
- Joined
- Feb 13, 2005
- Messages
- 522
im looking for fittings to hook my gn1 intake fuel rails (an) to stock lines. what r my options? please
fuel line adapters
- Thread starter "More Boost"
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
DailyDrifter
The Slow and the Curious
- Joined
- Dec 5, 2007
- Messages
- 5,118
http://www.turbobuick.com/forums/engine-tech/237041-fuel-lines.html?highlight=Fuel+lines This is for the stock rail, but might work for the champion
- Joined
- Aug 1, 2003
- Messages
- 9,624
you might need to do some bending to get the stock lines connected
if you dont already have the correct fittings call champion they should have them ,
on passenger side for the fuel feed the fitting youll is a -8an o-ring (goes to the champ rail) t(o saginaw female m16 (oring for the stock fuel line )
for return if the rail is for stock style regulator just hook the return line to the regulator as you would for stock ..if the driverside rail is for external regulator youll need to get a rail setup for stock
if your doing braided hose and trying to connect to the stock frame lines then you can use saginaw female to std AN male adapters from earls http://www.anplumbing.com/shop/index.php?shop=&dept=Metric
if you dont already have the correct fittings call champion they should have them ,
on passenger side for the fuel feed the fitting youll is a -8an o-ring (goes to the champ rail) t(o saginaw female m16 (oring for the stock fuel line )
for return if the rail is for stock style regulator just hook the return line to the regulator as you would for stock ..if the driverside rail is for external regulator youll need to get a rail setup for stock
if your doing braided hose and trying to connect to the stock frame lines then you can use saginaw female to std AN male adapters from earls http://www.anplumbing.com/shop/index.php?shop=&dept=Metric
Similar threads
