Fuel Lines

[Spoolin Hooligan]

Ok so i have been trying to fix my fuel line and have come to the realization. i want to just replace them with braided race lines. My question is is there a certain size diameter i should get. And does anyone know any good companies...... oh! and new line clamps would be nice too.

 

[johnny's86nash]

This would be a good way to start.

Racetronix - FPS-G7 - Fuel Sender, G7 SS, Single, AN FIT

 

[johnny's86nash]

AN -8 Stainless Steel Hoses

Your feed line should be -8AN and return -6AN. if your going to go with the braided lines use the PTFE (teflon) not the rubber lined ones.

 

[dynoman]

Go over to the" E85 Tech Forum" for fuel line info cause that is one of the limiting factors when running E85 so fuel delivery is discussed there often, and any system that good for E85 will be more than enough for straight gas. Also if you ever decide to go E85 you'll have already made one of the main upgrades.

 

[Spoolin Hooligan]

Go over to the" E85 Tech Forum" for fuel line info cause that is one of the limiting factors when running E85 so fuel delivery is discussed there often, and any system that good for E85 will be more than enough for straight gas. Also if you ever decide to go E85 you'll have already made one of the main upgrades.

Thanks will do

 

[Spoolin Hooligan]

AN -8 Stainless Steel Hoses

Your feed line should be -8AN and return -6AN. if your going to go with the braided lines use the PTFE (teflon) not the rubber lined ones.

Thanks comes in handy

 

[Phatman]

Check them out, hard to beat their selection, price and service...

RacePartSolutions - Fast Parts At Discount Prices