Gallons per hour Question

[Buick Beginner]

Gentlemen,
I'm toying with the idea of allowing my GN to drink Alky, (even though she's only 15 years old), and a bit of info. would definately help out. How much Gallons per hour should be injested by the motor? I see that many spray nozzles are rated by GPH and I was just wondering. It's going to be a home brew kit. I was thinking along the lines of perhaps a 2 stage kit with one nozzle coming in at 10 PSI and perhaps a second at 15 psi. But, should the 10 psi nozzle be 10 GPH and the 15 psi be 10 GPH as well, or more? I plan on using the F150 fuel pump, it looks like a good unit. Thanks for your help. - BB

 

[salvageV6]

I use (2) 10gph for now. First one comes on around 10-11 psi. second one is programmed to come on at 20psi.

Just finished the NOS Alky. solenoid wiring and testing last night, so far so good.

 

[Bob Avellar]

Two 10 gph's should be in the ballpark. I am presently using 2 - 13 gph nozzles if I remember correctly. 1st stage comes in at 6 lbs (where I whould normally get some knock on the 108 Thrasher chip) and the second stage comes in at 16 lbs. Everyone is going to need there own flow rates dependent on chip, airflow, other boltons, and what a particular combo likes. Fortunately alky is pretty forgiving over a wide range of variables.

 

[Buick Beginner]

Thanks

I appreciate it gentlemen. - BB