Gauge Panel

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Travon

87PSI
Joined
Aug 12, 2010
Messages
132
Hey guys! Was out driving yesterday and started noticing every time I would step into it, it would seem to bog or would not respond at all. Started going thru the scan master and my volts were dropping fast. 5 min from home and she gave out. Well long story short when I got home checked to see if the volt bulb was bad, but it was not blown so I removed the panel to make sure the socket was making a good connection. It seemed ok, so I put everything back together and turn the key and noticed something was burning, took the panel off again and it was a wire sandwiched inside the plastic that covers the back panel. So now my question, is there replacement for that? Wish I knew what it is called but hopefully you guys can help me out. Thanks!!
 
Is it possible you can take a picture of it?
Sometime a photo can speak more than words
 
2013-03-12_13-57-29_912.jpg
This is the wire that carries current to the check lights
 
You might need that whole piece behind the gauge cluster... I just happen to have a speedo that I have for parts which has all that circuitry in tact... Let me me know if you need it... I wouldn't even know how to price it.. 15 to 20 shipped depending on location????
 
U will need a printed circuit call Brain at gbodyparts.com i am sure he can get u a good use one to replace it done that one time myself no problem since .
 
You might need that whole piece behind the gauge cluster... I just happen to have a speedo that I have for parts which has all that circuitry in tact... Let me me know if you need it... I wouldn't even know how to price it.. 15 to 20 shipped depending on location????
Srry to post the above thread didnt realize u have one :(
 
lolo sent u a pm! Thanks turbo3.8 , I was just thinking about giving him a call. lol
 
Back
Top