glove box lock cylinder

[blackgn1]

How do you remove the glove box lock cylinder? Messed with it for a few minutes and couldn't see any set screw or locking ring.

 

[VIN7]

 

[GNONYX]

For future reference, this is in the "How To's " section

 

[blackgn1]

Thank you sir.

 

[blackgn1]

Worked. Simple when you know what to do.

 

[GNONYX]

Amen to that, I didn't even know how to remove the glove box cylinder lock until I saw the video

 

[TRICKSIXPA]

This is funny I just did this today but I've done it a couple times. I did find out that you can use a thick paper clip to get the lock cylinder out if the glove box is locked and the key wont work.


Posted from the TurboBuick.Com mobile app

 

[Dave Dunbar]

Work the lock. Don't look at the dogs.

Posted from the TurboBuick.Com mobile app

 

[X Ray]

Worked. Simple when you know what to do.

I am glad someone was able to get some useful information from the video....

 

[Chuck Leeper]

This is funny I just did this today but I've done it a couple times. I did find out that you can use a thick paper clip to get the lock cylinder out if the glove box is locked and the key wont work.


Posted from the TurboBuick.Com mobile app

Watched X ray's vid, and got the first one out w/ the key.
Second box has no key. Mind describing how you did it? I've been on this thing for an hr, w/ a piece of weld rod, can't seem to get the tumblers to release...

 

[larry33kc]

Good info

 

[TRICKSIXPA]

You have to push upward with the paperclip and work each tumbler one at a time while you pull the cylinder out. Keep pulling on the lock if you let go the tumbler locks might fall back in. I think there are like six of them in the cylinder.