im not 100% on the mileage but im pretty sure its around 95 before it was apart
ARP main and rod bolts (under 200 miles)
fresh king main and rod bearings (same as arp hardware)
the crank is std/std
new lifters
stock rods/pistons
stock heads/cam
Rjc powerplate
ported upper plenum
mallory adj fuel pressure reg (under 300 miles)
the headers have been milled and welded so they are pretty damn good
50lb injectors
mini starter
percison turbo turbo saver/ filter relocation kit
asking 1600 for the above
mease 3" downpipe - 300$
hooker 2.5 exhaust - 250$
i have a start up vid and some other vids of the motor a week before it came out
pics upon request
pm is key guys thanks.
ARP main and rod bolts (under 200 miles)
fresh king main and rod bearings (same as arp hardware)
the crank is std/std
new lifters
stock rods/pistons
stock heads/cam
Rjc powerplate
ported upper plenum
mallory adj fuel pressure reg (under 300 miles)
the headers have been milled and welded so they are pretty damn good
50lb injectors
mini starter
percison turbo turbo saver/ filter relocation kit
asking 1600 for the above
mease 3" downpipe - 300$
hooker 2.5 exhaust - 250$
i have a start up vid and some other vids of the motor a week before it came out
pics upon request
pm is key guys thanks.