scot w.
GNSperformance.com
- Joined
- Feb 19, 2005
- Messages
- 8,810
We have been rebuilding cam sensors for 5 years now and improving on the rebuild every year. This past year (2015) we now install a Heavy Duty roll pin that is Much stronger than the factory roll pin... This is included in the original rebuild price of $80.00 (which includes return shipping)... Here is an example of a cam sensor order that JW sent in to us...
Cam Sensor rebuild is still $80.00 (includes return shipping)
***** DO NOT SEND US YOUR CAM SENSOR CAP! ****
Send your cam sensor to the following address with a check or cash in the amount of $80.00 and Please include a note with your full name address and phone number just in case we have a problem.
GNS Performance
PO. Box 216
Dandridge, TN 37725
Here is a "BEFORE" picture of the one in the middle above.
Here is the "AFTER" Picture when we are done rebuilding it....
Cam Sensor rebuild is still $80.00 (includes return shipping)
***** DO NOT SEND US YOUR CAM SENSOR CAP! ****
Send your cam sensor to the following address with a check or cash in the amount of $80.00 and Please include a note with your full name address and phone number just in case we have a problem.
GNS Performance
PO. Box 216
Dandridge, TN 37725
Here is a "BEFORE" picture of the one in the middle above.
Here is the "AFTER" Picture when we are done rebuilding it....