You can type here any text you want

got my 2004r in the car but....

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
i think mine came of a 2000 or 2001 model

as far as i know they only came on the S10 extreems

the only thing that needs to be done is trim the hub inside the rim ...gm went to a little bit smaller hub on the newwer cars and trucks it so close it will almost go on but i ran a die grinder around the inside and they fit like a champ.

i'll try and get you some better shoots of the wheels themselves since i took them off yesterday and put my wlds on with dr's to go out and play

one friend of mine called all the junk yards around here and only found one set and they told him $600 for the rims or $1000 rims and tires.

i went on a few s-10 boards and found a few sets in the $550-$600 range.

the only color i know of is the gret color on mine but i seen one set off a newer one that wa the same rim as mine with the grey but the front surface of the spokes are machined finsh along with a machined finish center cap.

im not sure what i want for wheels now i've had the extreems for a while and im about ready for a change
 
SELL them to me!!!

Maybe we can work something out.....? Hrmm. Sell them to me. if you are interested in trading , let me know. I will trade you all the hard parts (billet)you need for them. Think about it..:)
If you are interested, Make my phone ring.... you know how..:D

Bruce
WE4
www.PTSnctb.com
 
:confused: can you see the smoke coming from my brain??

thinking about it

think i'll need billet parts with a 4.1 with 75 shot out the gate..:)

or would i be better off going with a converter?????

brain smoking ...i got a guy going to build me a tranny but he's in process of moving right now so it'll be a while ..best part is he bought a house on my street..;)
 
You aren't going to put truck wheels on your WE-4 are you:( Everyone will say "look at those truck wheels"!:rolleyes: :D
 
Damn right I am...

Yep I am . If nothing else it will be fun to run through the RE71 Bridgestones I got for them. I have had the tires just could never find a wheel I liked. If nothing else it will be fun..:)
 
i was gonna try and wash them up and get pics of them tonight but i just got home from fixing another blown out pump seal...:mad:

i will lay $ down that it wont come out again ...i drilled and tapped a hole on each side of it...

its loctited in with a #6 bolt on each side of it with the bolts locktited in.

i'll try and get you some good shots of them tomarrow and post em ..

oh and i had to go run my buddy's viper 4 times after fixing the seal it runs 11:80 @123 at the track and from afirst gear roll he didnt catch me till i was done with the 1/4 just as i got to a 1/4 he com up so it was pretty tight so we went up on the interstate and run from a second gear roll so traction was ok and at 130 mph he had me about 2 cars...oh well im on 93 octane and street chip at 19# oh well c-ya
 
Hey folks...I need some help here, my trans was rebuilt and I need a GN Valve Body and Governor so my mechanic can complete the job. Does anyone know where, who or what I can do to get my hands on these parts? Any suggestions and advice given would be greatly appreciated.

Thanks,

Todd M.
 
Thanks but Bruce who?? Do you have a email, web address, contact info?? How much would something like this cost me ya think?

Appreciate it!!

Todd M.
 
Bruce as in Me?

I am right here.:)

.No problem...:)

And I no longer have Shawns VB. They are spoken for. they go they do..:D
 
going out now at 1 in the morning to clean these wheels up and i hope to take pics before i go to the shop tomarrow morning so i can get them outside with daylight.

even if you deside you dont want them i think im gonna sell them anyway.

so how'd you like my bolt in the seal deal.....i bet i wont ever have that problem again.

im sure it got real hot cause i was loading up on it to find a noise right after making a couple hard pulls on the car.
 
im trying ...i dropped them off today to have the tires taken off figuring i could get them back today but the guy didnt get them done told me to come by in the morning and get them...:mad:
 
Hey Red? Take close pic. The ones with the small center are the ones. 2002 extreme. I am looking forward to a change...LOL:)
 
i guess what you meen is since the hub was smaller then they are the right ones..:confused:

im going to see if i can get time to get some good pics for ya.

they never hit curbs but do have a couple lil minor scratches but nothing major

they still have a bowtie in the center cap... i was going to put some power 6 decals over it but never did.

i've got a real busy day tomarrow (friday) so i'll try and get some pics but it will be late by time i get to it..

you know how fridays are everyone wants their cars back before the weekend
 
Ohhhhhhh.....

WE ARE WAITING!!!!!!!!!!!!


ROFL
 
Back
Top