Head Gaskets

[gnpoweredrail]

What are the best standalone headgaskets.
The block will be cleaned and the heads milled.They will be clamped down with aArp stud kit
I dont want to mess with sealers...with that said whats the best for 25 psi of boost.

 

[TURBO 6]

Use a stock style replacement gasket. It's been years since I've used them, but I'd imagine Fel Pro would be the most widely used.
They'll hold up fine with 25#'s of boost, but the tune MUST be correct. Any detonation at 25#'s of boost will cause big problems.

 

[WarWagon]

Felpro 9441PT
I spray 100Shot with 20PSI no detonation and no problems.

 

[esm]

thanks

thnaks for the part number cuase i had the exact same question !!!

 

[mikestertwo]

What are the best standalone headgaskets.
I dont want to mess with sealers...with that said whats the best for 25 psi of boost.

Stock

 

[TurboBuRick]

Cometics are the best IMO

 

[dr_frankenstein]

id would say it depends on hig or low deck.

if early block, stock steel shim is the best bet...

if late block, 9441, 1000s... etc all work great.