Heads, intake and rockers

[jpwalt1987]

Hey guys, I am putting some more of my go fast stuff up for sale. These are GN-1 heads ported by Todd McKenzie in california. He does alot of porting for Kenny Duttweiler from what i understand. These heads are a street/strip port job. They flow 249.5 @.600 on the intake and 219@.600 on the exhaust. The springs are set up for a 224/224 .560 lift solid roller. Dont know the spring rates though. They were checked out by Conleys' machinist and have only about 2 hours running time since then. they have a total of 1000 miles on them before that. The intake manifold was ported with the heads so it really need to be sold as a package. These are low 9 second capable heads. GN1s new are $1695 and the port work was $1000. Make an offer for heads and intake. I will throw in the ARP head studs with them.

I also have some T&D 1.65 roller rockers that have been clearanced for the heads and springs above. $400

Crane solid roller lifters for a 109 block. I would like to trade for a set of HYDRAULIC roller lifters.

DLS pushrods. these pushrods were used with a solid roller cam (small base circle)and lifter setup for about 2 hours of running time. they are 9.050 long. and .080 wall thickness. $100

I had put this fuel pump in another post but here it is again with a pic. $200. It has 1000 miles on it. it is the same as an aeromotive a1000
all prices plus shipping

 

[D's GN]

If the T&D rockers are for 14 bolt heads I will take them pending pics. Thanks :biggrin:

 

[D's GN]

I'll pass, the rockers will not fit my heads.

 

[dsmith4994]

rerice

shoot me a ballpark price shipped to 06492 for the heads, intake and roller rockers to dsmith4994@aol.com i am very interested in a package deal.....dave

 

[Cme2fly]

Any pics of the roller rockers?

 

[MiamiHenri]

Ill take the rockers

I have the same heads I will take the rockers if you still have them, thanks Henri...

 

[hartbuick]

It All

I AM VERRY INTRESTED IN THE HEADS INTAKE AND ROCKERS E MAIL PRICE HARTDERRICK218@HOTMAIL.COM THANKS

 

[rogerv6]

Heads

you have pm

 

[turbomatt]

Heads

Intrested in heads only. Send me a pm with what you are looking to get out of them.

 

[jpwalt1987]

I want to sell as a package first. If I cant sell as a package then i will seperate. Here is what all this breaks down if bought new:
Heads:$1695
Intake:$ 300
T&D's: $450
ARP studs:$ @65
Port work: $1000

Total: $3510

You can get all of the above for $2500 Plus shipping

Right now DSMITH4994 is first in line for the COMBO. If it doesnt sell as a combo i will relist it in a new post and people interested in pieces can reply then. thanks, Jeremy:smile:

 

[dsmith4994]

reackage deal

You took to long to respond i bought another turbo car with the money. Please go on to next in line. Thanks.......Dave

 

[hartbuick]

LET MAKE IT HAPPEN E MAIL ME HARTDERRICK218@HOTMAIL.COM

 

[jpwalt1987]

sale pending

Hartbuick.....so you want heads, intake , rockers, and studs? correct? I accept Post office money orders only. PM me your information and lets deal.

 

[jpwalt1987]

I must apologize!!!

Gentlemen, due to some unforseen personal matters that have come up I will have to postpone the sale of all items in this post until further notice. I apologize for any inconvienance. I will repost when these matters are resolved. Thank you for understanding. Jeremy:redface: