help w/ torque conv. i.d. please

[eiuskoalman]

got a mystery converter and need a little help i.d.-ing it. there is a white and lime green tag on the front of it with a bar code in the middle along with FJAB 865 and 3307 in bold. i'd assume that 3307 is someones model #, sound familiar to anybody? thanks again, aaron

 

[eiuskoalman]

anybody out there?

 

[GNeric]

Is this a 245mm converter? If so, the code would mean: F= front wheel drive, J= 2061 stall, A= 215ft/lb, B= FWD 237.0mm Bolt circle.

Hope this helps.

 

[eiuskoalman]

not sure if its a 245mm converter. i wouldnt think a front wheel drive unit would fit a rear wheel drive BRF trans, is this possible?

 

[GNeric]

If it is not the 12" diameter, stock sized converter, then my codes won't cover that. If it has been rebuilt at one time and they used a 245 cover, then the code won't matter anyway. Sorry.

 

[eiuskoalman]

ok, previous owner says he thinks it is an art carr 9" non l/u. does anyone have a pic of the flywheel side of one of these? thanks, aaron