Help with MAF Translator install.......

[WH1]

I'm going to install the MAF Translator and a 3" LT1 MAF sensor. I was wondering what position the MAF needs to be put in. I see which direction the flow goes but does where the harness plugs in have to be on top? Can this go to the right side? Thanks.

 

[Topjimmy]

The plug connector on the MAF can be in any position. The most critical placement is the Trans + itself as it is vunerable to underhood fluids and yet you'll need to have access to it to make your adjustments. I installed one in an `87 T behind the glove box by splicing into the existing ECM harness (Samuri-style) . It's well-protected there and adjustment access is excellent. Do a Search on Translator, you'll get all the info you need. Send me an e-mail if I can help.

HTH- Jimmy

 

[WH1]

Hey thanks for the reply, Jimmy. I like your user I.D.'s cool reference to V.H., too.

 

[Lee_Burough]

I used extensions to place the T+ near the driver's seat. Also used the plug 'n play adaptor for the spark hookup. I' do it the same way again