Help with rear U Joint? 1350 shaft to stock rear yoke.

[mikes78]

Hi guys. I have a custom driveshaft with a 1350 yoke and Id like to use a conversion joint to mate the stock grand national rear yoke. (I actually have a 442 rear under it but I believe its the same) Does anyone know the joint part number I would need to use this setup? Thanks!

 

[toomanymodz]

I would buy a yoke and install it yourself. Denny's Driveshafts sells them.

 

[Chuck Leeper]

I use Mark Williams.....NOT CHEAP. But, it is a quality part.

 

[pacecarta]

http://www.dennysdriveshaft.com/c147_combo_jt_1350_to_gm_3r...3_58_outside_to_2_916_inside.html

 

[forcefed3.8's]

That is a greasable u joint, I would not use it. Get a yoke.

 

[novaderrik]

go to a NAPA that has a good counter guy and tell him what you need.. you will get hooked up.

 

[Grumpy]

That is a greasable u joint, I would not use it. Get a yoke.

X2