NEWCHAPTER
Need Speed
- Joined
- Jun 8, 2003
- Messages
- 397
just trying to find the best technique
How to do a burnout
- Thread starter NEWCHAPTER
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
Jack Evers
Member
- Joined
- May 24, 2001
- Messages
- 690
I generally put in second gear and burn til I churp.
salvageV6
Daily Driver
- Joined
- May 25, 2001
- Messages
- 20,971
Apply brakes, push line lock button, release brakes, and nail it. 
Easiest way.
Easiest way.
NEWCHAPTER
Need Speed
- Joined
- Jun 8, 2003
- Messages
- 397
I dont have a line lock, but if I hold the throttle a bit to about 2500 and hold the brakes then let off nail the gas and tap the brakes would that work...
my85grandnation
85 Triple Threat
- Joined
- Mar 12, 2004
- Messages
- 1,501
How to do burnout
I just hold down the brake a little ways and then I start to apply the gas. Usually by the time my throttle is a 1/4 of the way in the tires have begun to spin and screech I then just slowly let off the brakes while given it more throttle.
I just hold down the brake a little ways and then I start to apply the gas. Usually by the time my throttle is a 1/4 of the way in the tires have begun to spin and screech I then just slowly let off the brakes while given it more throttle.
my85grandnation
85 Triple Threat
- Joined
- Mar 12, 2004
- Messages
- 1,501
exactly
mytyphoon1993
New Member
- Joined
- Apr 12, 2003
- Messages
- 322
Can one of you guys teach me how to do a burnout in my truck
my85grandnation
85 Triple Threat
- Joined
- Mar 12, 2004
- Messages
- 1,501
I have never done one in an all wheel drive truck but it might be similar to doing one in a car. try slightyly holding the brakes and then slowly increase the throttle. You might be able to get all four wheels burnin then but I don't know.
the truck is easy. tie a chain around the biggest tree you and find and nail it!
I've been doing a lot more burnouts than i need to be doing it depends on what you want, nice smokey burnout? hold the brakes hard and floor it untill the tires are spinning then let out of the throttle untill your happy or can't breathe, or happy because you can't breathe...
some big black lines? same thing as above but insted of just letting them roast start letting out of the brakes untill your moving slowly. that will give you nice dark lines. take some sidewalk chalk to sign your work
or make it a lot better by doing it in a little bit of bleach, its like fog!
its not hard...
I've been doing a lot more burnouts than i need to be doing
it depends on what you want, nice smokey burnout? hold the brakes hard and floor it untill the tires are spinning then let out of the throttle untill your happy or can't breathe, or happy because you can't breathe...some big black lines? same thing as above but insted of just letting them roast start letting out of the brakes untill your moving slowly. that will give you nice dark lines. take some sidewalk chalk to sign your work
or make it a lot better by doing it in a little bit of bleach, its like fog!
its not hard...
Nobody mentioned the most important step!!!
LOOK ALL AROUND YOU FOR COPS!!!!!
Personally, I like trying to write my name in posi marks. But when you misspell it, then it's annoying because you have to cross it out and start over.
Are we talkin' burnout box?? Roll slowly thru the water then light 'em up AFTER your out of the water. I see so many ricers light it up in the water and wonder why there's no smoke. :O
LOOK ALL AROUND YOU FOR COPS!!!!!
Personally, I like trying to write my name in posi marks. But when you misspell it, then it's annoying because you have to cross it out and start over.
Are we talkin' burnout box?? Roll slowly thru the water then light 'em up AFTER your out of the water. I see so many ricers light it up in the water and wonder why there's no smoke. :O
Originally posted by mytyphoon1993
Can one of you guys teach me how to do a burnout in my truck
When I had a Typhoon, it wasn't much good for burnouts, but it did awesome donuts
The Camaro does OK though
http://www.ls1speed.com/movies/jim.wmv
mytyphoon1993
New Member
- Joined
- Apr 12, 2003
- Messages
- 322
That is a very badass 2wd burn out, it was possible by disconnecting the front propshaft.Originally posted by denn454
how?
was the awd somehow disabled?
also how much wil that guy pay for a new set of tires
Yep, pulled the front drive shaft and punished the worn out tires as much as I dared before one/both exploded. I was getting new tires the next day and wanted to make sure I got every last ounce of use out of the old ones before they were replaced.
Hopefully I'll have a similar vid of the dually in my sig in the next couple of weeks as it needs new rear tires too
Hopefully I'll have a similar vid of the dually in my sig in the next couple of weeks as it needs new rear tires too
- Joined
- Aug 24, 2003
- Messages
- 4,285
How about a dual GN burn out! http://www.zodiacdj.com/GrandNational/KillinRubber1.mpg
Me and a buddy took the cars out this weekend for some pictures and to blow all the dirt of those bad tires from sitting all winter! Bad Bad tires! The only thing I forgot to do ( I'm in the GN on the right ) was to check what way the wind was blowing before we started! Days later and I think my car still stinks of rubber! Enjoy! Here are some pics we took as well..
http://www.zodiacdj.com/GrandNational/JimandNicksCars/
Some cool desk top pics in there!
Me and a buddy took the cars out this weekend for some pictures and to blow all the dirt of those bad tires from sitting all winter! Bad Bad tires! The only thing I forgot to do ( I'm in the GN on the right ) was to check what way the wind was blowing before we started! Days later and I think my car still stinks of rubber!
Enjoy! Here are some pics we took as well..http://www.zodiacdj.com/GrandNational/JimandNicksCars/
Some cool desk top pics in there!
