john saleeby
Active Member
- Joined
- Aug 5, 2006
- Messages
- 480
Replacing my faulty fuel sending unit. Requesting advice/tips on removing tank and unit.
Gonna disconnect battery terminals, place on jack stands and remove tank straps. Gonna replace stock straps with stainless straps. Any advice on marking bolt locations so as to make strap re-install easier?
Cut a plywood piece, 18 inches by 18 inches to place under tank and on floor jack to distribute weight evenly. Mark hoses, disconnect hoses, then remove locking ring to allow pump and sending unit removal. Again any tips/advice appreciated.
Thank you in advance.
Gonna disconnect battery terminals, place on jack stands and remove tank straps. Gonna replace stock straps with stainless straps. Any advice on marking bolt locations so as to make strap re-install easier?
Cut a plywood piece, 18 inches by 18 inches to place under tank and on floor jack to distribute weight evenly. Mark hoses, disconnect hoses, then remove locking ring to allow pump and sending unit removal. Again any tips/advice appreciated.
Thank you in advance.