You can type here any text you want

Hypothetical question about running a blow through setup (carbed intake) but retaining cam sensor/coils

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

V6UnderPressure

The Artist FKA Scott4DMny
Joined
May 27, 2001
Messages
2,913
This is just for discussion purposes so I don't need the "why" questions. I know of some folks running a blow through setup on the older buicks and running a distributor, etc. The question is, can the ignition be run with the cam sensor and some sort of piggy back or standalone ignition controller to run individual coils (like LS coils, etc.)? Has anyone done this?
 
Stock ECM could do it. No different than cranking the engine over with the fuel pump disconnected or the injectors unplugged. If it has a carb it’ll fire right up.
Want CNP? Use a tr6 module.
 
Terminator x stealth I tried to talk a friend into it He just has a mental block with Holley
 
Back
Top