I need a picture????

[Dhos1]

Of an installed throttle body from the left side. If you are standing facing the windshield the left side of the throttle body. I am re-installing it after having Steve Monroe work it. There's a connector that has a 2 pin adapter that connects by a screw that I am unsure of how it attaches. Remember not the linkage side, the other side.

Thanks

 

[Lil Truck]

Here are photos of both sides, are you talking about the throttle position sensor?

 

[v6turbo87]

There are no 2 pin connectors on a stock throttle body???

Posted from the TurboBuick.Com mobile app

 

[v6turbo87]

TPS is 3 pins.

Posted from the TurboBuick.Com mobile app

 

[Dhos1]

Okay, there is a connector that attaches to the black piece there on the side of the throttle body in the first picture. That is the piece that has a 2 connector thing. Does it connect to the bottom screw or the top?

 

[buddy]

Idle air control valve??

 

[v6turbo87]

IAC is 4 pins

Posted from the TurboBuick.Com mobile app

 

[v6turbo87]

Here is mine....

Posted from the TurboBuick.Com mobile app

 

[Dhos1]

Thats it....but my car has a bracket of some sort with a connector w/ 2 pins that I'm trying to find out if it attaches to the top screw or bottom screw there. I'm guessing my car is wired bakwards or something. I will try to get a picture uploaded. I am at work w/ crappy internet service.

 

[jowy]

The only 2 pin conector is the westgate solenoid

 

[Dhos1]

Finally got th piuc to go through.....

 

[v6turbo87]

Is the connector red? If so it goes to the stock waistgate solinoid. The solinoid bracket attaches to the valve cover bolt not the throttle body.

Posted from the TurboBuick.Com mobile app

 

[Dhos1]

Sorry for the crappy pic..YES...IT IS RED!!!! And it has a flimsy looking clip on it of some sort.

 

[v6turbo87]

Ok that is the stock WG solinoid and it goes here:

Posted from the TurboBuick.Com mobile app

 

[Dhos1]

Thats it. Thanks man....

 

[v6turbo87]

Glad to help!

Posted from the TurboBuick.Com mobile app

 

[Dhos1]

Last question. It looks like vacuum hose goes on the end, but I can't remember one being connected-is this correct? Man, my mustang--I coul tear it apart from memory. I won't try that agin, how about I take pictures..lol.

 

[Nascar83Fan]

Are you asking about the solenoid having one connected or something else?


Posted from the TurboBuick.Com mobile app

 

[v6turbo87]

Yes it goes to the turbo and waistgate actuator. Do you use a stock type waistgate or an external gate?

Posted from the TurboBuick.Com mobile app

 

[Dhos1]

Stock typewaste gate...my setup should look just like yours v6turbo87. Once again, thanks guys!!