You can type here any text you want

iac question

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

skostur79

New Member
Joined
Apr 27, 2005
Messages
128
ok tested my iac its dead ,

will the 86-87 work at all?
anyone here tried?

84-85 is 3 times more , just thought id check
 
it is the same part i used it when i swapped over to the 87 engine.
 
IAC for Hot Air and IC are different as listed.

Application IAC - GM PN
Hot air 25530695
IC 25527077
 
looks like i had a 86-87 in there i put the new 85 back in

and it idles
but still high at 950 counts good at 30 (yes base idle was set)

the chip says dyno tech stage 3

any one know that co.

would the idle functions be set higher?

thanks for the 2 that responded ,
 
Check ALL hoses for vacuum leaks.
IAC motor may be suspect. Clean the TB with some carb cleaner and make sure yout TPS is set. Check for a sticking throttle. Drive the car for a bout 10 miles and reset your IAC and TPS after the drive.
 
Back
Top