If you have a CAS V4......

[GNICETRY]

Can you measure the 2 bolts and spacers for me?

 

[TurboTnZ06]

There's 3 bolts total to the IC and they are the same. Do you need the thread/pitch? Just unscrew the driver side one if you have it, it's the same one as the other two.

 

[GNICETRY]

In the second picture there are the 2 bolts that go into the intercooler from the bracket. Those are no problem. If you look at the first pic you will see that there is one bolt that goes into the bottom of the water pump and that has a small spacer to bring the bracket out so as to not hit the crank pulley. The 2nd bolt looks like it goes into the block mounting point (?) for the OEM intercooler bracket. I need to know the size of those 2 bolts and the size/length of the 2 spacers.
Do you have a CAS V4 or the bolts that you could measure for me?

 

[GNICETRY]

NO ONE has one of these bad boys in their closet that they could measure the bolts/spacers?

 

[nonosv6]

I've been looking for this info too. Idk if you already tried a search, but I think I remember someone posting some info on this subject several months ago.


Posted from the TurboBuick.Com mobile app