Injector Problem, need help

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Justa231

Member
Joined
May 25, 2001
Messages
156
I recently purchased injectors from a board member. I put them in yesterday and one is leaking. They are 60lb injectors. There is a little hole on all of them and this one is leaking by the little hole. I havent started the car, just cranked it. Trying to figure out how to post a photo.
 
I think I got it. The photo is showing where it is leaking from.
IMG_7789.JPG
 
Those look like Moto's. Can you confirm? I have them on my car and don't remember mine having what you're pointing at. I'm at work, but I will check when I get home. I would say to contact the board member that you got them from and talk it over if you're sure that they're not leaking from the top of the injector (where they install in the rail), or the bottom (where they install in the intake). Did you replace the o-rings? Did you lube the o-rings on installation? Clean out the bosses really well?
 
Siemens/Mototron. It is not leaking by the rail or the intake. It is coming right out of that hole. Hope that helps. Please let me know. Thanks
 
The picture you have posted looks like the fron passenger, right? #2 i believe.

I'll look this evening when i get home unless somebody else beats me to it.
 
That is the drivers side number one. My 60's have those little holes also but why it's leaking out of there I don't know. Get ahold of Chuck Leeper on here as he's the injector guru.
 
If that's where it's coming from, I'd consider it unuseable, and should be replaced. I've flow checked A LOT of those, and have yet to see 1 leak there...
Then, there' always JB QUIK!! J/K. I'd not take a chance on burning the car down....:eek:
 
OK thanks. Yes, First injector on drivers side. I had it at the second injector location and leaked there also.
 
I just checked mine and they do have the hole like yours, but no leaks.
 
Back
Top