By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!Didnt pressure test it but did fill it with water and no leaks .how do you go about pressure testing it? Yeah though about extending the factory one , but those aluminum ones look a lot nicer.
Going to have to go to home Depot .is bweay from gbody parts?
Two 4-6" pieces of approx 2" PVC pipe, Two 2" PVC end caps, PVC glue, 2 short pieces of IC hose, 4 T-bar clamps, one threaded tire valve stem, a paddle bit, a drill, and air compressor, a regulator set to 25 PSI, an air hose, and an air chuck
And a big tank of water.
Kinda like a boost tester.
I'd post a pic of mine - but I'm tired of the cold rain going out to the shop.
Going to have to go to home Depot .is bweay from gbody parts?
damn that's a bunch of trouble!!!
Or you can just get a minibike innertube, cut it, put the ends over the intercooler ports and fill it up!! LOL (I might have came up with that idea when I was a Yamaha service manager and had my intercooler off at work doing a timing chain swap)
damn that's a bunch of trouble!!!
Or you can just get a minibike innertube, cut it, put the ends over the intercooler ports and fill it up!! LOL (I might have came up with that idea when I was a Yamaha service manager and had my intercooler off at work doing a timing chain swap)