Is This Combo Good For 11's

[charlloots]

hey guys
i would appreciate any info anybody has.
here it is a 1987 turbo t 70000 miles stock block champion heads
port & polished intake kb 70 mm tb & dog house kb ramair stock
intercooler te-60 turbo atr adj wastegate &3in dp 3in flowmaster
exhaust atr superpump 40lb inj atr 208 201 cam 3000 stall
convertor 3.42 posi 275 50 bfg drag radials kb pro chip for the
street . terminator 2 with c16 @ the track.

anybody want to hook up at englishtown be glad to soon as the
weather cools down.

charlloots
WE4

 

[NEARING]

How much boost?
I would think so with a good 60ft.
Might want to go to a CAS V4 or somethink like it.

 

[blackbuick87]

Are you going to ditch the drag radials for slicks?

 

[azgn]

never get there with drag radials....get some stickies and you should be ok

 

[charlloots]

GOOD FOR 11'S

LOOKING TO GET 19 LBS OF BOOST
WOULD LIKE TO RUN 11'S WITH STOCK INTERCOOLER
I WAS TOLD IT COULD BE DONE. AS FOR THE SLICKS
I AM LOOKING FOR A PAIR. I STILL HAVE THE STOCK 7IN RIMS.
I WOULD LIKE APAIR OF SKINNIES FOR THE FRONT.
WANT TO RUN THE CAR BEFORE I DO ANYMORE MODS.
BUY THE WAY ANYBODY KNOW IF WESTERN WHEELS IS STILL
IN BUISNESS. LOOKING FOR 8.5 LOOKALIKE TURBO T WHEELS
THANKS CHARLLOOTS
WE4

 

[UNGN]

You can run 11's with stock intercooler, but putting a big neck on a stock intercooler makes it easier. At the boost level you need, about 2 psi is lost in the neck. A big neck stock intercooler will allow more boost for the same wastegate setting.

I would use a dump instead of a flowmaster exhaust, too.

Other than that, your goals are achievable with a tuning and a good track.

 

[charlloots]

re big neck

thanks i looked into the neck i am going to order
a duttwiler. one more question do you think 28in slicks would
help or hurt my times.

charlloots
we4

 

[UNGN]

28" tires can only help.

Even with ported heads and a cam, turbobuicks still make a ton of low end torque and still don't like to rev much over 5000 rpm.

You can also launch a little harder with 28" tires.

 

[xtreme6mwm]

I think you should hit the 11's pretty easy with your combo, even with the drag radials. I've gone 11.97 on drag radials with a
TE60, 43lbers(009's)70mm/Hemco upper,and most importantly,it was a stock block,stock heads, stock cam and a stock converter through ATR's 3 inch duels,and stock rear. It is important that you do a big burn out and run around 14lbs. in the back tires. I was also running about 23lbs.of boost,good luck,and let us know how you did!

 

[charlloots]

hey guys
i didnt get to the track yet. but i just picked up a pair of et streets
12.5 x 15 with 8.5 centerline auto drags 2 air bags skinnies for
the front with 90/10 shocks still need rear shocks any suggestions
thanks again
charlloots
we4

anybody wanna hook up at english town ?
sept/oct

 

[Kevin Turch]

Hey, got any more money to throw my way

So have you taken it to the track yet?, if so howed it run

 

[charlloots]

GOING TO THE TRACK TOMMORROW CANT WAIT HOPE THE WEATHER HOLDS UP E TOWN HERE I COME . I WILL LET YOU KNOW THE NUMBERS . ANYBODY ELSE GOING TOENGLISHTOWN TOMMORROW BUICK WEEKEND
CHARRLLOOTS
WE4

 

[charlloots]

Originally posted by Kevin Turch
Hey, got any more money to throw my way

So have you taken it to the track yet?, if so howed it run [/SORRY KEV THE TREE SHED ITS LAST DOLLAR . HAVE TO WAIT FOR THE NEXT HARVEST.QUOTE]
CHARRLLOTS
WE4