just installed SMC kit, car not running right

[rwrows]

ok so it was running great before i put the kit on. it was running great with the kit on and no alky. then i topped it off with denaturated alky. seemed to run great. got into boost like 3 or 4 times and had no problems. alky was working fine. well after about the 5th time, whenever i would get into boost the car would shut down and almost stall out. any advice??

 

[nullrout]

ok so it was running great before i put the kit on. it was running great with the kit on and no alky. then i topped it off with denaturated alky. seemed to run great. got into boost like 3 or 4 times and had no problems. alky was working fine. well after about the 5th time, whenever i would get into boost the car would shut down and almost stall out. any advice??

I'm no expert but that sounds like your loading up/too rich. Did you change the settings on the control box at all from when it worked to when it stalled? You should also post what you have your settings at, start and full spray settings and how many pounds of boost you've got the wastegate set at. I think if you post those someone better than I can help...or you could call Steve at SMC...he's always helped me right away.

 

[TurboBuRick]

What maf are you running? Any translators?

Any way you can log the condition? powerlogger? directscan? turbolink?

 

[rwrows]

could it be the chip?