You can type here any text you want

Length of lugnut tool with jack

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

John Larkin

Sublime Master of Turbology
Joined
May 25, 2001
Messages
5,007
I have the stock jack and know how it is mounted. I think I grabbed a stock looking lug wrench at some point but I think it is too long. I found a photo on the net about how the handle mounts to the jack and it looks like it tucks into the jack foot somehow. Can someone post a photo of your stock setup so I can figure out what is going on please? It seems like it needs a sleeve to hold it to the side of the jack. The photo I found is old and grainy.
 
These should help.
The straight end of the lug nut wrench tucks in under the flat part of the foot.
I can measure the length when I get home.

081E840E-702F-4D2C-8488-2AFA62AD83AA.jpeg


The curved end under the bracket.
913B4865-AC53-48F2-8C57-B7761AF34040.jpeg
 
Your pictures helped. I had the jack mounted already and it was too closed for the handle to go under the foot. I removed it and it relaxed enough to slip the handle under the foot, then I mounted the whole assembly back onto the studs, problem solved, thank you. The one I have does not follow the bottom bracket curve exactly but close enough that it holds it securely. Looks OEM to me.
 
Back
Top