Long Block, Weld RTS and other stuff.

[RED LS1]

-Full set of Weld RTS wheels. Great set of wheels for the track. They have some fading to the black but still look good and polish up well. Mickey Thompson street Radial tires in good condition front and back. 275-50-15. Plenty of life for the track. The best measurement I can get from the rear wheels is 15x9 with 4.5” backspacing. Weld uses funny measurements so they are probably their 9.330 they advertise not sure. I had them on a Buick GN and had to use a small spacer. A 1/8 would be perfect.

-3.8 (109) engine Long Block. Stock crank, rods and Pistons freshen up with new King bearings in 2012. Although this ran good in my car with no issues I’m advertising it as “should be freshened up again.” It’s a used engine and I don’t want to sell anyone a problem motor. Compression was around 115-125 across the board. Rare Bowling green customs deep pan, comp 212 flat/T cam, Comp double roller timing set, ARP main studs and head studs. Cometic gaskets, King bearings. Complete OEM heads that are suppose to have light port cleanup and Good valve springs. H&R mounts are not included. $1800 picked up.

-Factory headers and crossover ( drivers sided welded) 175
-Upper water pump pulley 30
-Lower crank pulley 75
-Balancer 80
-AC Y bracket 30
-coolant tube for intake 60
-Coil pack bracket (both pieces) 50
- 60lb injectors I bought new from TT in 2012 and Chip I bought from TT in 2017 that matches. $100.

 

[RED LS1]

Wheels

 

[ScottHeidinger]

I will take the injectors and chip


Sent from my iPhone using Tapatalk

 

[RED LS1]

Here is the pic for that. If you're interested feel free to shoot me a PM.

 

[SpeedRacerX]

Didn't see a price on the wheels and tires but I'd take the fronts if the price is right and you are willing to separate. Shouldn't be too bad to ship the fronts.

Sent from my SM-G965U using Tapatalk

 

[RED LS1]

Wheels are supposed to be $1200. Not sure how I missed that. I'm in S.E PA and don't want to break the set. I'm near you on the PA side of the Commodore Barry Bridge.

 

[SpeedRacerX]

Wheels are supposed to be $1200. Not sure how I missed that. I'm in S.E PA and don't want to break the set. I'm near you on the PA side of the Commodore Barry Bridge.

Ok, thanks. Yeah, I'm just looking for a set of skinnies to toss on once or twice a year for the track. Nothing fancy. Glws.

Sent from my SM-G965U using Tapatalk

 

[Trashman]

sending pm on wheels

 

[RED LS1]

Wheels and injectors are sold. Long block available and will likely be breaking it down this week if it doesn't sell.

 

[Jstephens129]

What’s your location

 

[RED LS1]

Aston PA 19014

 

[RED LS1]

Long block is no longer available.