looking for Ls1 3 1/2 '' maf to 87 gn adapter .

[bpman1234]

yes i need Ls1 3 1/2 '' maf to 86-87 gn adapter thanks

 

[earlbrown]

Are you looking for the electronic box to make the LS1 work, or the MAF pipe and couplers to physically mount it?

 

[pacecarta]

translator has the plug already there for the LTI 3" or LS1 3.5 mafs

guesses ...
he needs the 5 pin plug adapter for the delphi ZO6 85mm maf .
he needs a translator
or hes looking for the silicone adapters to 3"

....or none of the above

 

[moparkid]

If you're talking about the silicone adapters, I bought mine from Spectre in California. The parts work good, but they quoted me a price with shipping and then charged my credit card for an additional amount I didn't authorize. I got a refund, but buyer beware.

 

[bpman1234]

looking for the adapter plug from stock maf to a ls1 maf for gen2 i have the zo6 right now but i think its giving me a proplem so i want to try the ls1 3 1/2 '' maf that i have .

Posted from the TurboBuick.Com mobile app

 

[pacecarta]

so you need an adapter that takes stock maf plug to LT1 MAF plug ?

when i did mine i didnt use any fancy adapter i just spliced in a LT1 maf plug pigtail (cut from junk yard) to the factory harness


you could build one or call casperselectonics and they may have it available or can build one for you using
http://www.casperselectronics.com/store2/product_info.php?cPath=61_62_5_6_9&products_id=1002
and http://www.casperselectronics.com/store2/product_info.php?cPath=61_62_5_6_9&products_id=1070

 

[bpman1234]

ok got ya gonna go to you pull it to tomorrow thanks.

 

[bpman1234]

ok went to the junks today and got the Lt1 plug its the same as the ls 31/2 so now how do i wire it to the gn plug middle wire to middle left wire to left wire right wire to right wire ?thanks .

 

[pacecarta]

as i recall colors are similar for connecting ground to ground , power to power , and whats left is output signal wires
the stock is
A 12v pink /blk stripe
B center signal out grey/red stripe
C ground ,blk/white stripe

the LT1 is
A signal out yellow
B ground blk/wht
C 12v pink

 

[bpman1234]

man thanks pacecarta i'll giveit a shot see what happens .