Maft pro chip

[32getrdy]

Looking for a Maft pro chip for 60lb motorons-good street chip, thx


Posted from the TurboBuick.Com mobile app

 

[DCVING 6]

Pretty sure I have one in my garage somewhere. I'll see if I can get out there this evening.

 

[32getrdy]

That would be great, thx


Posted from the TurboBuick.Com mobile app

 

[32getrdy]

That would be great. Thx


Posted from the TurboBuick.Com mobile app

 

[DCVING 6]

Found it... The chips ID is PWOX7B1F
P
W= requiers scanmaster 2.1 or greater
O= 60lb injectors
X
7= wastegate 19/20psi (I used the MAF PRO's boost control setup) was going to use alky
B= idle/rev limit 800/6000
1= anti-theft + convenience/valet mode (can be turned off)
F= current software revision

Let me know if this is something that would work for you.

 

[32getrdy]

That will work. Pm sent. Thx


Posted from the TurboBuick.Com mobile app

 

[32getrdy]

Let me know the best way to contact you. D


Posted from the TurboBuick.Com mobile app