Maxeffort?

[Whitettype86]

I pulled my Ac out and plan on installing the non Ac/heater unit in.
My question is if i use my maxeffort and it says there is some tuning to use the switches on the Ac panel. Is this going to be a problem for me?

 

[REEDOG]

Ask that question here. http://members.boardhost.com/MaxEffort/ I've got no A/C either but I kept the controls in the dash. It may be a little more difficult for you.

 

[zam70]

You just jump the pressure switch...and yes, you have to keep the controls inside the car...Or I guess you could wire up a switch if you wanted to ditch those to.

 

[Nick Micale]

If the A/C is removed, no pressure switch or A/C harness to actuate the contols.

Just use a jumper switch at the ECM to fool the computer that A/C is on. Most applications of the mafless set up do not need offset programing.