McGuard lug nuts with weld wheels

[PaulRV6]

Will these lug nuts (P/N 63016) 1.365" shank work with the stock axle studs? I will be switching back and forth from the stock wheels to the weld wheels so I do not want to change any studs.
Will this work?

paul

 

[strikeeagle]

Paul,

http://www.mcgard.com/automotive/product.asp?page=6&group=12

Suggest you consider the open end, racing style lug nuts, #63002. These have some advantages:

1. They can accommodate long studs should you choose to go that route in the future.

2. If you get tech'd and the tech guy wants to check thread engagement all you have to do is take the plug off one of the nuts with an allen wrench. Or, you could just leave them all off for racing. The covers come off easily, yet remain secure once tightened - no fear of loss.

3. They look like they mean business, because they do.

strike

 

[PaulRV6]

Ok, didn't even notice these. I see they only sell 4 to a package, why? We need 5 correct? Are they expecting you to buy 1 locking lugnut? What if you do not want to use them. Thanks for the tip.

paul

 

[strikeeagle]

Yup, they're expecting you to buy a lock for each wheel. If not, just buy 3 X 4 = 12 and you'll have 2 extra.

strike