Mega shifter install

[aquickv6]

Does any one have the correct part number for the B&M Mega Shifter. One model is a stand alone and the other is for console, but not the buick. I want this to mount in the stock console as shown in pictures on Nicks website.

 

[Blown&Injected]

Far out - did not know they had a different Mega-Shifters.

At least 16 years ago I put one in my car by fabricating a mounting plate and recall having to add about 1/2" spacer on one end (rear end of the mounting plate - I think) Then went to junk yard and snagged another insert (the thing with the PRNOD321 and the ash tray in it). That thing got chopped up and drilled for the B&M plate. Oh yeah, I also cut out a piece of black but kinda translucent Plexiglas to go in-between the B&M plate and the cutup insert. - Worked very good but making the stock shifter cable work was a PITA.

Would like to learn how the other type goes in.

 

[MSDGN]

This is the one from Nicks website...many AZ guys use it...

http://www.prostreetonline.com/buy/b&m_megashifter/universal/

 

[84gnguy]

I have a Megashifter in my 87..can't stand it.
If someone has a good stock shifter w/cable,etc. I'd be willing to swap.
The top plate has been reversed,meaning the ashtray is now near the radio,this was done to fit the shifter.Looks trick,but again I don't like it.

 

[aquickv6]

So it is the Universal model that fits right in the stock console?

 

[TwinyTwin]

So it is the Universal model that fits right in the stock console?

YES.