Melling Oil Pump Alternative

[Jerryl]

Is Melling the only oil pump rebuild kit manufacturer for our application?
I am unable to find an alternate manufacturer for the HV pump.

 

[Eticket]

Jerryl,

Try Elgin. But I'm not sure if they are made by Melling also.

Good luck.

 

[charlief1]

Jerryl,

Try Elgin. But I'm not sure if they are made by Melling also.

Good luck.

You're correct. Melling makes most of the stock replacement parts for our motors. Send me a PM if you want a discount Jerryl. I'm working for "the zone" so I may be able to help some if you need it.:biggrin:

 

[Jerryl]

You're correct. Melling makes most of the stock replacement parts for our motors. Send me a PM if you want a discount Jerryl. I'm working for "the zone" so I may be able to help some if you need it.:biggrin:

Thanks Charlie.
After some measurements, I contacted Melling for the pump kit I just purchased.
The parts appear to be out of spec. I was asked to return them to the store as "Defective" and they would return to the factory for investigation.
Maybe I am too picky and just want things right . . . . .

I really "just" want a known good set of gears, that are flat, at the correct height, with the correct pitch dimension.

Jerryl,
Try Elgin. But I'm not sure if they are made by Melling also.
Good luck.

Thanks man! I'll take a look.

 

[87GN_70GS]

Standard oil-pump kit:

Clevite 601-1249
Melling K20I
Federal-Mogul 224-518

High-volume pump kit:

Clevite 601-1288
Melling K20IHV
Federal-Mogul 224-518V

Thrust plate:

Clevite 601-8030
Melling P20I
Federal-Mogul 224-518TP

High-volume pump kit and thrust plate:

Clevite 601-1967
Melling K20IPHV