Might be returning to buick ownership,few?s

[cadillac adam]

I may be getting an 87t and had some ?s. Who are some of the good vendors? I used to buy from modernmuscle car, do they still exist? Is there a diff between the turbo 3.8 block and the na 3.8 block? Crank, rods? Thanks!

 

[Quick6'n'-K.C.]

mike licht now has his own company.

http://www.fullthrottlespeed.com/Dynamic/index.asp?CartId=7693008NWDE-EVEREST-R532&tpc=

all 86 and 87 blocks, rods, timing cover assy, complete heads, are exactly the same, minus not having the oil drain in the block-

the last digits on the drivers side of the block will be 109. that is the good block-

the crank is different, no rolled fillets, but will work no problem if its not turned too much- people run low 11s with them AS LONG AS YOU DONT DETONATE IT

BW

 

[ttypewe4jim]

Originally posted by Quick6'n'-K.C.
mike licht now has his own company.

http://www.fullthrottlespeed.com/Dynamic/index.asp?CartId=7693008NWDE-EVEREST-R532&tpc=

all 86 and 87 blocks, rods, timing cover assy, complete heads, are exactly the same, minus not having the oil drain in the block-

the last digits on the drivers side of the block will be 109. that is the good block-

the crank is different, no rolled fillets, but will work no problem if its not turned too much- people run low 11s with them AS LONG AS YOU DONT DETONATE IT

BW

some people are even in the 10s with a n/a block and crank

 

[Quick6'n'-K.C.]

lol-
ive got a non turbo crank in my green car.
TE45A, big valve heads,23 stretch,3000#s, broken tranny

BW

 

[87WE4NJ]

Stage 1 Auto

I get all my cars including a built Buick 87 T WE4 service by

Rob Chilenki, owner
Stage I
422 Route 23 North
Pompton Plains, NJ 07444
Stage 1 Automotive Home Page
(973) 839-4900

Tell him I promised you 10% off on the first job

He keeps his words, palys fair and admits his occasional mistakes.