My 8445 Race Ported Heads / T&D`s 1.65

[J-B Racing]

Selling the Heads & Rockers off my Race Car to go with another Project.

--------------------------Heads----------------------------
Iron 8445 Fully Ported
Valves 1.71`` Int & 1.55`` Ex. S/S Swirl Polished (Speed Pro)
Comp Cam 941 Springs, Retainers and Locks
Flows are +/- 210 Intake / 170 Ex. @ .500``
Teflon Seals and will clear over .600`` Lift Cams
Bronze Liners
Magnesium Filled EGR Center Ports
Narrowed Rocker Towers to clear any Type Roller Rockers
S/S O-Rings per Combustion Chamber .040`` ( .020`` in / .020 `` out )
SCE Head Gaskets come with the Heads as the Ring Grooves are inbedded
in the Copper Gasket. Used twice and are good for 5 total.
You will NEVER blow HG again with these. .070`` Thick.
They have been on the Car for 3 years at 30 psi of boost and never leaked.
$950.00 plus shipping. ( You will not get all this at this price )
***Heads are not assembled for those who want pics. please PM me..

---------------------------------------------------------------------
T&D Roller 1.65 Rockers
Machined to clear BBC 1.500`` Springs
$350.00 plus shipping
Pics are available

 

[joe_schindler]

I'm interested in the rockers:

Are they cut to clear the stands; or will the stands have to be cut?

How many miles or runs are on them?

What would shipping be to Benbrook, Texas 76116?

Thanks,

Joe

 

[J-B Racing]

I'm interested in the rockers:

Are they cut to clear the stands; or will the stands have to be cut?

How many miles or runs are on them?

What would shipping be to Benbrook, Texas 76116?

Thanks,

Joe

Stands would have to be Cut.
I would say about 1,000 Miles
$30.00 Shipping Postal Service.
-------------------------------------------
I will try to post Pics of the Rockers and the Heads later...

 

[J-B Racing]

pics

Intake are Ported for Fel Pro # 1200 and Exhaust # 1400
Sorry..one picture should not be there....:biggrin:

 

[J-B Racing]

pics

That's All Folks..............

 

[J-B Racing]

Last Note

You can use Stock Head Gaskets on these Heads.
Both Items would have to be sold. I do not want be stuck with
the Heads or the Rockers. As I cannot use these Rockers with the other set-up.


Thanks for looking..


Joe

 

[9SECVSIX]

P&P Heads..

Hi Joe.
Sent you a PM on the heads.

 

[J-B Racing]

Sale pending on the Heads...
Rockers are still available, and I may lower the price on the
RRRRRockers..

 

[cpac]

Jb Are These The Same Heads That Your Car Ran 130 Mph Last Summer,i Will Get In Touch With You

 

[J-B Racing]

sold

Sorry CPAC the Heads are sold, and possibly the Rockers too...
And yes, these Heads took me 132 MPH with a slipping transmission which explains why I am going with a TH400..


Thanks
Joe