need a new turbo

[spyder]

wondering if anybody had any info on the best solution for a stock or slightly modified turbo replacement. I just had my motor rebuilt and i want to replace the factory turbo with the same or a slight upgrade, I'm not looking for anything fancy just a good solid turbo(must be new). motor has an upgraded cam, 3' exhaust, and a 3' downpipe

 

[Gn-ing]

Originally posted by spyder
wondering if anybody had any info on the best solution for a stock or slightly modified turbo replacement. I just had my motor rebuilt and i want to replace the factory turbo with the same or a slight upgrade, I'm not looking for anything fancy just a good solid turbo(must be new). motor has an upgraded cam, 3' exhaust, and a 3' downpipe

I would go with a TA49 or a TA60...these fit just like stock,take about 60 mins to install...plus us can easily run in the low to mid 12's with these turbo's,some hit the 11's....cost is about 700 bucks....

 

[oehm]

I would vote for the TE44 or TA49 turbo. I have a TE44 with a CK performance 3400 9/11. Talk about instant booooooost.

Trust me, you will not be dissappointed. For a small turbo, the TE44 pulls hard at 22+ psi

 

[turbo nasty]

ta60 would be a lil' on the laggy side. GT3255E, TE44 OR TA49 would suit you fine. preference to the GT

 

[spyder]

thanx guys

so i know what kind of turbo, where is the best place to get it. cottons, poston ???? any help

 

[turbo nasty]

full throttle, cottons, limit eng, postons