need help installing holleyon my motor

[mikemcvaney]

Need help on metering mods for power valve hookup on a turbo motor thank you MikeMcvaney

 

[WarWagon]

You will have to plug either the power valve port on the throttle plate or the passage after that in the main body. Then drill and tap the side of the main main body into the power valve vacuum well. Then connect that new port to any vacuum source on the intake manifold or anyting AFTER the turbo.

 

[charlief1]

Or you could just check with Holley. I think they have a boost refferenced carb now.

 

[mikemcvaney]

Took the carb apart and figuredit out thanks guys, Mike

 

[charlief1]

Took the carb apart and figured it out thanks guys, Mike

Don't know that we were much help but you're welcome.:redface:

 

[mikemcvaney]

Sometimes just talking with others helps makes sure I am on the right track got enough feedback to help.