Need picture of door lock switch installationfor theft deterrent

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Phoneguy

Cometic HG stress tester
Joined
Aug 27, 2002
Messages
6,888
Body shop did not install the switches inside the door for my factory theft deterrent system. These switches attach to the lock cylinder. This keeps draining my battery. Does anyone have a picture of the switch installed so I can put this back together?

email is 9secondv6@gmail.com

Thanks
Bryan
 
I will try to get a pic today. I don't see how it's draining the battery though.

D
 
Call me at the shop and I will look it up.....door locks working correctally?
 
Gary, the locks work correctly with the lock switch, the passenger door doesnt work right with the key though.

Bryan
 
Gary, just called the shop ...no answer

You can call my cell at 314 393 6536

Bryan
 
All the alarm switches have to be installed (including switch on trunk lock).
dome lights must work with both doors.
check pass lock linkage,all this must work.
when all looks good,open passenger door,push lock electrical switch,alarm light should go out in a couple of minutes....all this is off memory,so if this wrong,someone chime in please...
 
Sorry I missed your call Gary...Much appreciated anyway!!


Bryan
 
Glad you got it.....for future seaches, the switches were not mounted to the lock cylinder
 
Glad you got it.....for future seaches, the switches were not mounted to the lock cylinder
Gary, one switch actually has the clip that holds the lock cylinder to the inside of the door, the other attaches to the other end of the cylinder where the rod attaches with the clip. I will take a pic when I replace the door clips.

Bryan
 
Back
Top