Need pushrods 5/16 8.100 and wideband...

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
Need wideband harness and sensor to connect to Gen II Translator. Thanks, John.:cool:

1 set of 12 Competiton Cams pushrods part# 7785, 5/16 x 9.100 long :$75. + shipping...

I dunno if you could these...:confused: You're sure you want 8.100 long ? :eek:

Let me know if interested...

Claude. :wink:
 
claude 8.100 works with iron heads ,roller cam and harland sharp rockers
for some reason fullthrottle was supplying 8.250 with their roller kits which wont work with the harlands (also from them on same order) that have only .050 recommended adjustment range
 
Interesting. The heads must have a couple of good millings on them. I have a set of 200 mile, Trick Flow 8.200 .080 wall.

I used with hyd roller cam and T&D rollers.

$60 shipped.
 
claude 8.100 works with iron heads ,roller cam and harland sharp rockers
for some reason fullthrottle was supplying 8.250 with their roller kits which wont work with the harlands (also from them on same order) that have only .050 recommended adjustment range

Ok Paul, thanks for clarifying!...:wink: Now I remember that the 9.100'' long pushrods were for a TA aluminium block with roller cam in conjunction with M&A heads......but they're still for sale!...:D

Thanks,

Claude. :)
 
Back
Top