Lil Truck
I spend to much time here....
- Joined
- Sep 26, 2002
- Messages
- 907
Great work! Curious if you had the hoist fully extended on the 1/4 ton setting? What did you use for the motor attachment?
Need some Help
- Thread starter USMC_Turbo6
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
USMC_Turbo6
Well-Known Member
- Joined
- Dec 13, 2009
- Messages
- 1,605
Yes it was at the 1/4 ton setting. I also had to remove the bumper and the grill to get close enough to lift the motor. I then took a four foot piece of change and connected at a diagonal to the front and back side of the block. Then pulled it right up with no problems without hitting anything
Sent from my SPH-L710 using TurboBuick Mobile mobile app
Sent from my SPH-L710 using TurboBuick Mobile mobile app
