You can type here any text you want

need some info please

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

87gnfan

Member
Joined
Jul 4, 2005
Messages
39
i am getting my motor rebuilt and have a question,the guy at the machine shop where my motor is at was putting it back together noticed that the rods being bolted down to the crank had like .020 side to side play in them.is this normal or to excessive.he told me he would order new rods that were .010 over to take up some of that side to side movement.now if i have him finish putting this together does any one think i will have a problem.he does not think there will be a problem.

another question.when he took the motor apart he noticed that the rod caps were on backwards and the rods he says were mounted backwards.is this possible and if so what would that do to the motor.any info would be deeply appreciated.car has been down since oct.and i would like to get it finially done...........thanks
 
Back
Top