Toby_Goodmk
Test Fit officianto
- Joined
- Dec 9, 2011
- Messages
- 1,851
Most you know I work for goodmark. Well if you dont know you now know. Anyways, I am in the process of doing a front and rear face lift with new paint and fillers around. When I ordered my rear fillers two pairs came in. So, I just bought them. I thought well i'll shove them in the basement and use at a later time. Well then last night I started painting. I decided to shoot them as well. May as well sell them while I am at it. I can get new ones anytime. So here are the details. BTW, no cheap materials used. Also black is black. it will match your car.
Cleaned prepped and adhesion promoted
Two coats of Omni epoxy BLACK
Two coats of factory pack black 19u code
2 coats of PPG Deltron
$500 plus shipping takes them. Ill put them back in the same box they came in, wrap them nice and send them on.
They will also be wet sanded and buffed to a glass like surface later today. If you want to see how they look on the car, and my painting technique see the below thread where I put the rear ones on a few weeks back.
http://www.turbobuick.com/forums/th...fillers-quarter-panel-body-line-paint.435738/
Cleaned prepped and adhesion promoted
Two coats of Omni epoxy BLACK
Two coats of factory pack black 19u code
2 coats of PPG Deltron
$500 plus shipping takes them. Ill put them back in the same box they came in, wrap them nice and send them on.
They will also be wet sanded and buffed to a glass like surface later today. If you want to see how they look on the car, and my painting technique see the below thread where I put the rear ones on a few weeks back.
http://www.turbobuick.com/forums/th...fillers-quarter-panel-body-line-paint.435738/
